MARANTZ SC-8 Stereo Pre Amplifier Vintage 1982 Hi Fi Working 220 Volts Good Look

MARANTZ SC-8 Stereo Pre Amplifier Vintage 1982 Hi Fi Working 220 Volts Good Look

Original item made for the Japanese market, Original in 100 volts, but it is prepared with an internal transformer to work in Europe on 220/240 volts

Condition like new from collection, works perfect without any problem

Marantz SC-8 120,000yen(around the 1982 time)

Control amplifier which carries the tone quality which kept being polished, and a variegated functionality in a symmetrical design.

performing a perfect push pull stream composition to the whole page from MC head amplifier to flat amplifier -- the improvement in a nakedness property, and the reduction in NFB a TIM it is considered as the Low-TIM design which banishes a dynamic distortion at first.

MC head amplifier constitutes the perfect push-pull circuit of a single-sided channel 9 stone stream composition from the first rank of a super-low-noise transistor 2 parallel push pull to a SEPP output stage.

Moreover, phone amplifier has perfect push-pull-circuit composition influenced by the impedance variation of the input/output, and the metal film resistor of less than 1% of an error and less than 2% of polypropylene capacitor are adopted as an equalizer element.

Flat amplifier is an original whole page push-pull circuit, and is used as pure Class-A amplifier.

The two-step Darlington scheme especially according to a super high fT (200-250MHz) power transistor in a final stage is adopted.

The Phono selector carries man-month cartridge loading selector of three positions other than MC head amplifier position.

A right-and-left independent tone control, the mutual dubbing functionality of the two decks, a two-step switchover loudness control, and two outputs switch, and functionalities, such as a High/EQ Subsonic car filter, are carried.

The tone switchpoint which bypasses a tone arm and can attain simple-ization is carried.

The 70-micrometer printed circuit board which made thickness of the Copper foil twice usual is adopted. Moreover, the improvement in a tone quality is aimed at by adopting an oxygen-free-high-conductivity-copper ship and a coaxial cord as a signal path.

Furthermore, quality parts, such as a low scaling-factor foil capacitor which reduced source impedance, a copper plating chassis, and a power cord of 15A, are adopted.

Form Stereo control amplifier

Input sensitivity/impedance Phono1 man-month: 2.2mV / 27kohm, 47kohm, 100kohm

Phono2 man-month: 2.2mV / 47kohm

Phono1 MC: 0.12mV/100 ohms

High SFT Level: 150mV / 40kohm

An Output power/impedance 1.5V/100 ohm

THD 0.005%

Cross modulation distortion 0.003%

Frequency characteristic 20Hz-20kHz�}0.2dB (RIAA)

SN ratio (IHF-A) Phono MM:86dB

Phono MC:73dB

High Level:104dB

Dimensions Width 474x height 172x depth of 266mm

Weight 8.5kg